Blog

Introduction to Copper Press Fittings

In the world of plumbing, precision and durability are everything. A small leak can lead to devastating water damage, costly repairs, and unhappy homeowners. Enter copper press fittings—a revolutionary solution that combines strength, simplicity, and a watertight seal. For years, copper has been a go-to material in pipe systems, but press fittings elevate its potential to new heights. If you're a professional plumber, a contractor, or even a homeowner exploring reliable plumbing options, this guide unveils everything you need to know about leak-free copper press fittings.

1. Why Copper? The Backbone of Modern Plumbing

Copper has stood the test of time in plumbing. But why is it still the material of choice in a market brimming with plastic alternatives?

Durability and Longevity

Copper boasts impressive durability. It resists high pressure, extreme temperatures, and mechanical damage. Properly installed copper piping systems can last over 50 years—sometimes even a century. That’s a lifespan that puts most plastic options to shame.

Corrosion Resistance and Health Benefits

Unlike galvanised steel, copper doesn't rust. Its natural corrosion resistance prevents pipe degradation, maintaining water quality. It’s also a biostatic material, which means bacteria struggle to survive on its surface. This makes copper ideal for delivering safe drinking water.

Moreover, copper doesn’t leach harmful chemicals—no microplastics, no endocrine disruptors. That’s why it’s often used in hospitals and schools, where health and safety are paramount.

2. What Are Press Fittings?

Press fittings are mechanical connectors that use pressure to join copper pipes without the need for soldering or welding.

How They Differ from Traditional Fittings

Traditional plumbing often relies on heat-based soldering, requiring open flames—a potential hazard in confined or sensitive environments. Press fittings, however, are installed using a hydraulic press tool that compresses the fitting onto the pipe, creating a permanent, leak-proof seal.

This flame-free system reduces fire risk and speeds up the job.

Types of Press Fittings Available

Press fittings come in a variety of shapes and sizes:

• Elbows (90° and 45° angles)

• Tees (for branch connections)

• Couplings (for straight joins)

• Adapters (for joining to threaded pipes)

Each type is designed with sealing elements—typically EPDM or HNBR rubber O-rings—to ensure a watertight seal under pressure.

3. Installation Process Explained

Installing press fittings is not only safer but also significantly faster than traditional methods.

Tools Required

• Press tool (manual, battery-operated, or electric)

• Pipe cutter

• Deburring tool

• Depth gauge

• Marker pen

Step-by-Step Guide

1. Measure and cut the copper pipe to the desired length.

2. Deburr and clean the pipe ends to remove sharp edges and debris.

3. Mark insertion depth with a gauge to ensure proper alignment.

4. Insert the fitting onto the pipe until it reaches the depth mark.

5. Use the press tool to compress the fitting—creating a secure, leak-proof connection.

That’s it! No waiting for joints to cool, no purging the system of gas, and no dealing with excess solder.

4. Leak-Free Assurance: How Press Fittings Prevent Water Damage

One of the greatest benefits of press fittings is their consistent seal quality.

Uniform Pressure Sealing

The mechanical press applies uniform pressure around the fitting, engaging the O-ring and copper simultaneously. This ensures no weak points, unlike soldered joints where human error or uneven heating can result in future leaks.

Real-World Leak Prevention Stats

According to plumbing industry surveys, press fittings show a 95% reduction in leak-related call-backs compared to traditional soldered systems. That's huge when you’re dealing with large-scale installations or commercial properties.

5. Cost Comparison: Press Fittings vs Traditional Methods

Isn’t all this high-tech equipment expensive? Not necessarily.

Material Costs

While the fittings themselves may be slightly more costly than soldered components, you save in other areas. Copper press fittings require fewer consumables—no flux, solder, or gas.

Labour and Time Efficiency

Press fittings are a dream for labour costs. Installers can complete connections in less than half the time compared to soldering. This means:

• Lower labour charges

• Shorter project timelines

• Reduced downtime for businesses or homeowners

In many cases, the initial investment in press tools pays for itself within a few jobs.

6. Environmental Impact and Sustainability

Copper press systems are not only efficient—they're eco-friendly too.

Copper Recycling and Eco-Friendliness

Copper is one of the most recycled materials on earth. In fact, up to 80% of copper ever mined is still in use today. Press fittings make it easier to disassemble systems without damaging the pipes, supporting reuse and recycling.

Reduced Water Wastage

Because the connections are reliable and rarely leak, press fittings help prevent water loss—something that’s becoming critical in drought-prone regions and urban infrastructure planning.

7. Safety and Regulatory Compliance

Safety is a non-negotiable in plumbing. Press fittings raise the bar.

Fire-Free Installation Advantage

Without the need for torches or solder, there’s zero risk of fire, making press systems perfect for wooden structures, hospitals, or high-rise flats with stringent safety codes.

Meeting Building Codes

Press fittings are widely approved under international and British plumbing standards. Whether you're working under BS EN 1057 or WRAS certification, copper press systems tick the boxes.

Common Myths About Press Fittings Debunked

Let’s clear the air:

• Myth: Press fittings aren’t as strong as soldered ones
  Truth: When installed correctly, they meet or exceed pressure and burst strength standards.

• Myth: The O-rings wear out quickly
  Truth: Quality fittings use EPDM or HNBR seals rated for decades of use.

• Myth: They're not good for hot water
  Truth: Press fittings are ideal for both hot and cold systems, up to 110°C or more.

Maintenance and Inspection Best Practices

Though press fittings are low-maintenance, it’s still wise to:

• Visually inspect joints annually

• Use leak-detection dye or tools if necessary

• Replace worn-out O-rings if dismantling a joint

Thanks to their consistency, most issues stem from improper installation rather than material failure.

FAQs

1. Are copper press fittings suitable for gas lines?

Yes, with the correct type of O-ring (usually HNBR), press fittings are certified for gas applications.

2. Can I use press fittings on old copper pipes?

Absolutely—just ensure the pipe is in good condition and free from corrosion.

3. How long do copper press fittings last?

Most manufacturers rate them for 50 years or more, with proper installation.

4. Are press tools expensive?

Quality tools start around £300, but they quickly pay for themselves in saved time and labour.

5. Do press fittings work in tight spaces?

Yes, compact press tools and fittings make them ideal for confined or awkward areas.

6. Is a press system more secure than solder?

Yes—especially when installed correctly. Press connections offer consistent sealing, unlike variable solder joints.

Conclusion

Copper press fittings are transforming plumbing—offering speed, safety, durability, and above all, leak-proof reliability. Whether you're outfitting a modern flat or retrofitting a historic property, press fittings give you peace of mind that your system will hold strong for decades to come.

Say goodbye to blowtorches and hello to a cleaner, faster, and greener way to plumb. Invest in copper press fittings—and make leaks a thing of the past.

Pick up your Copper Press Fittings at Press It Today

Pegler Xpress Water 90degrees Bend 22mm

Introduction to Milwaukee Press Tools

Milwaukee press tools are revolutionary in the field of plumbing, HVAC, and electrical work. They streamline the connection of pipes and fittings, making jobs quicker and more efficient. However, this power and efficiency come with an essential responsibility—safety.

Understanding how to safely use a Milwaukee press tool not only protects you and your colleagues but also ensures the longevity of the equipment and the quality of your work. In this guide, we’ll explore everything you need to know about using these powerful tools responsibly and safely.

Why Safety Matters with Press Tools

You might be tempted to treat Milwaukee press tools like any other power tool—but that’s a mistake. These tools operate under high pressure and require strict adherence to safety practices. A small error can lead to injury, damaged equipment, or failed installations.

Industry Standards and Regulations

Adhering to British safety standards such as BS EN 62841 (for hand-held motor-operated electric tools) is vital. OSHA and HSE guidelines also provide additional safety frameworks. Non-compliance not only puts workers at risk but can also lead to legal complications.

Understanding How Milwaukee Press Tools Work

Press tools work by exerting immense force to create a secure, leak-proof joint between metal pipes and fittings—no open flame or soldering required.

Key Components of a Milwaukee Press Tool

Types of Milwaukee Press Tools

• M18™ FORCE LOGIC™ Press Tools – for large diameter piping

• M12™ Press Tools – compact models ideal for tight spaces

• Hydraulic Press Tools – offer consistent force and durability

Understanding your model and its capabilities is crucial for safe operation.

Pre-Operational Safety Checks

Before turning on your tool, it’s critical to perform several safety checks.

Inspecting the Tool Before Use

• Check for visible damage, including cracks or worn grips

• Ensure the battery is charged and seated properly

• Test the trigger function without a load

Verifying Fittings and Jaws

• Match the correct jaw size to the pipe diameter

• Inspect jaws for signs of wear or cracks

• Ensure fittings are clean and properly aligned

Personal Protective Equipment (PPE) Requirements

Never operate a press tool without wearing the appropriate PPE:

• Safety goggles or face shields

• Cut-resistant gloves

• Steel-toe boots

• Hearing protection (for prolonged use)

Proper PPE isn’t just a recommendation—it’s a regulation. The use of press tools creates risks such as pinching, crushing, or flying debris.

Safe Operating Procedures

Correct Handling and Grip

Always use two hands when handling the press tool. Keep your fingers away from the jaws and never bypass the safety trigger.

Proper Pressing Techniques

1. Position the fitting correctly

2. Secure the jaw and close it fully

3. Pull the trigger—do not release until the cycle completes

4. Inspect the press joint for proper sealing

Avoid jerking or twisting the tool mid-press, as it can compromise the seal and increase the risk of injury.

Common Mistakes and How to Avoid Them

Maintenance and Storage for Long-Term Safety

Cleaning and Lubrication Tips

• Wipe down the tool after each use

• Lubricate the ram every 40 hours of use

• Keep jaws free from oil and debris

Storage Best Practices

• Store in a dry, dust-free environment

• Avoid leaving batteries in the tool during storage

• Keep in a protective case to prevent damage

Troubleshooting Common Issues Safely

Error Codes and Their Meanings

• Flashing Red LED – Low battery or jammed jaws

• Solid Red LED – Overheating or cycle failure

• Green LED – Tool ready and operational

When to Call a Professional

If your tool fails to complete a press cycle or emits smoke or abnormal noise, stop immediately and consult a certified Milwaukee technician.

FAQs

1. Can I use Milwaukee press tools on plastic pipes?
No, these tools are designed for metal pipes only. Use tools specific to plastic systems.

2. How often should I inspect my press tool?
Daily inspections are recommended, especially before each use.

3. What’s the lifespan of a Milwaukee press tool?
With proper maintenance, up to 10 years or more.

4. Do I need certification to operate one in the UK?
Not legally required, but highly recommended through industry training programmes.

5. Can I interchange jaws from different brands?
No. Always use Milwaukee-approved jaws for optimal safety and performance.

6. What happens if I don’t complete a press cycle?
The joint may not seal properly, leading to leaks or system failure. Always let the tool finish its cycle.

Conclusion

Milwaukee press tools are brilliant assets in any tradesperson’s toolkit. But like any power tool, their benefits come with responsibilities. By understanding how they work, following proper protocols, and integrating regular training and maintenance into your routine, you’ll ensure not only your safety but also the success of every project you undertake.

To make the most of these high-powered tools, commit to a safety-first mindset. It’s a small effort that yields massive returns in quality, efficiency, and peace of mind.

Shop Milwaukee Press Tools Now

Milwaukee M12 Sub Compact Force Logic Hydraulic Press Tool | Profile-M | Incl. 3 Jaws

View our full range of press tools available.

Introduction to Leak-Free Plumbing

Plumbing leaks can be a homeowner’s worst nightmare. From minor drips to major pipe bursts, water leaks can cause structural damage, increase utility bills, and create health hazards like mould growth. Traditional plumbing methods, such as soldering or threading, often require skill, time, and labour. However, a game-changing solution has emerged—copper press fittings.

Copper press fittings offer a reliable, efficient, and leak-free alternative to conventional plumbing methods. This modern technology has gained traction in residential, commercial, and industrial applications, providing durability, ease of installation, and long-term cost savings.

In this article, we’ll explore why copper press fittings are the secret to leak-free plumbing, how they compare to traditional methods, and what makes them a must-have for modern plumbing systems.

Understanding Copper Press Fittings

What Are Copper Press Fittings?

Copper press fittings are mechanical connectors used to join copper pipes without soldering or threading. They feature a rubber O-ring inside the fitting, which creates a watertight seal when pressed with a special tool.

How Do They Work?

The installation process involves:

1. Cutting the copper pipe to the desired length.
2. Deburring and cleaning the pipe end.
3. Inserting the pipe into the press fitting.
4. Using a pressing tool to apply uniform pressure, which compresses the O-ring and secures the connection.

Why Are They Popular?

• No open flames – Eliminates the fire hazard associated with soldering.
• Fast installation – Connections can be made in seconds.
• Versatile – Suitable for a variety of plumbing systems, including water supply, heating, and cooling.

Advantages of Copper Press Fittings

1. Leak Prevention

Copper press fittings provide a secure and tight seal, reducing the risk of leaks. The integrated O-ring ensures a watertight connection, even under high pressure.

2. Speedy Installation

Unlike soldering, which requires cleaning, fluxing, heating, and cooling, pressing a copper fitting takes seconds. This reduces labour costs and minimises downtime for plumbing projects.

3. Durability and Longevity

Copper is a corrosion-resistant metal, and press fittings maintain their integrity for decades. The O-rings used in these fittings are designed to withstand temperature variations and chemical exposure.

4. Cost-Effectiveness

Although copper press fittings may have a higher initial cost, they provide long-term savings by reducing:

• Labour expenses.
• Material waste.
• Risk of repairs due to leaks.

5. Eco-Friendly Benefits

Copper is 100% recyclable, making it an environmentally sustainable option. Additionally, press fittings eliminate the need for flux and solder, which can introduce contaminants into the plumbing system.

Comparing Copper Press Fittings with Traditional Methods

How to Install Copper Press Fittings

Required Tools and Materials

• Copper pipes
• Copper press fittings
• Pipe cutter
• Deburring tool
• Press tool with appropriate jaws

Step-by-Step Installation Guide

1. Measure and cut the copper pipe.
2. Deburr the pipe edges to prevent O-ring damage.
3. Insert the pipe into the press fitting until it reaches the stop.
4. Align the press tool around the fitting.
5. Press the fitting using the tool to create a permanent seal.
6. Inspect the connection to ensure a secure fit.

Common Mistakes to Avoid

• Skipping deburring – can lead to O-ring damage.
• Improper tool placement – results in an incomplete press.
• Using the wrong O-ring material – may lead to compatibility issues.

Common Applications of Copper Press Fittings

Residential Plumbing

• Potable water systems.
• Heating and cooling pipelines.

Commercial and Industrial Use

• High-rise buildings.
• Industrial fluid distribution.

HVAC Systems

• Chilled water systems.
• Radiant heating.

Key Considerations When Using Copper Press Fittings

• Ensure pipe compatibility – Copper press fittings are designed for use with copper pipes only.
• Check pressure and temperature ratings – Different O-ring materials are suited for varying conditions.
• Follow manufacturer guidelines – Each press tool has specific operational requirements.

Troubleshooting and Maintenance

Identifying Leaks

• Look for water seepage around fittings.
• Inspect O-rings for damage.

Ensuring Proper Seal

• Confirm that pipes are fully inserted before pressing.
• Use the correct press tool size.

Long-Term Care and Best Practices

• Periodically check fittings for wear.
• Avoid exposure to harsh chemicals that can degrade O-rings.

Industry Standards and Compliance

Copper press fittings comply with British plumbing standards, ensuring safety and performance. Reputable manufacturers follow regulations set by:

• WRAS (Water Regulations Advisory Scheme)
• BS EN 1254-7 (Copper Press Fittings Standard)

Always choose fittings that meet industry standards to ensure safety and longevity.

Future Trends in Copper Press Fittings

Technological Innovations

• Advanced O-ring materials for extreme environments.
• Smart fittings that detect leaks electronically.

Growing Adoption in Plumbing Industry

• More professionals are switching to press fittings due to time and labour savings.

Sustainability and Environmental Impact

• Increased use of lead-free and recyclable materials.

FAQs on Copper Press Fittings

1. Are copper press fittings better than soldered joints?

Yes, they offer a faster, safer, and more reliable alternative to soldering.

2. Can I use copper press fittings on old pipes?

Yes, as long as the pipes are clean and free of corrosion.

3. How long do copper press fittings last?

With proper installation, they can last 50+ years.

4. Are they safe for drinking water systems?

Yes, they meet WRAS-approved standards for potable water.

5. Do they work with different pipe materials?

No, copper press fittings are designed specifically for copper pipes.

6. Can I install copper press fittings myself?

Yes, but using the correct tools and techniques is crucial for a leak-free installation.

Conclusion

Copper press fittings have revolutionised the plumbing industry, offering a leak-free, durable, and efficient solution. Whether for residential, commercial, or industrial applications, these fittings provide long-term reliability and cost savings.

By embracing modern press technology, plumbers and homeowners alike can enjoy a hassle-free, sustainable, and high-performance plumbing system.

Shop our Copper Fitting Top Picks from Conex

Introduction

Plumbing professionals and DIY enthusiasts alike know the importance of having the right tools for the job. The Rothenberger press tool has gained significant attention in the industry, but is it truly worth the investment? This article explores the features, benefits, and potential drawbacks of this tool, helping you make an informed decision.

Understanding the Rothenberger Press Tool

What Is a Rothenberger Press Tool?

A Rothenberger press tool is a specialised plumbing device designed to join pipes using a pressing mechanism rather than traditional welding or soldering. It offers a quick and reliable way to connect pipes without open flames, making it a safer alternative.

How Does a Press Tool Work?

Press tools function by using hydraulic or battery-powered force to compress metal fittings around pipes, creating a watertight seal. This method eliminates the need for flux, solder, or adhesives.

Key Features of Rothenberger Press Tools

• High-Performance Battery: Long-lasting power for extended work periods.

• Ergonomic Design: Comfortable grip and lightweight build.

• Durability: Built with high-quality materials for longevity.

• Versatile Jaw Compatibility: Works with various pipe sizes and materials.

Comparing Rothenberger with Other Brands

Rothenberger vs. Ridgid: Which One Is Better?

Both brands are well-respected in the industry, but Rothenberger stands out due to its European engineering and robust build. Ridgid tools, on the other hand, are known for their extensive jaw compatibility.

How Rothenberger Stands Out Among Competitors

Rothenberger press tools are praised for their precision, minimal maintenance requirements, and long battery life. They often outperform cheaper alternatives in terms of reliability and efficiency.

Benefits of Using a Rothenberger Press Tool

Speed and Efficiency in Plumbing Jobs

Press tools significantly reduce installation time compared to traditional methods. A single press takes seconds, making projects quicker and easier.

Cost Savings in the Long Run

While the initial investment is high, reduced labour costs and increased efficiency mean long-term savings. Fewer repairs and maintenance also contribute to cost-effectiveness.

Enhanced Safety Compared to Traditional Methods

With no need for open flames, press tools reduce fire hazards on the job site. This is particularly important in confined spaces where soldering poses risks.

Limitations and Drawbacks

Are There Any Downsides to Using a Rothenberger Press Tool?

• Upfront Cost: Higher price point than traditional hand tools.

• Battery Dependence: Downtime if the battery runs out mid-job.

• Learning Curve: Requires some training for optimal use.

Who Should and Shouldn’t Buy It?

• Ideal Users: Professional plumbers, contractors, and frequent DIYers.

• Not Ideal For: Occasional home users who may not need such a high-end tool.

How to Choose the Right Rothenberger Press Tool

Factors to Consider Before Buying

• Pipe Compatibility: Ensure it works with your pipe sizes and materials.

• Battery vs. Manual Models: Battery-powered options offer convenience, while manual versions may be more affordable.

• Warranty and Support: Check for service options and warranty coverage.

Top Rothenberger Press Tool Models Reviewed

1. Rothenberger Romax 3000: Lightweight, powerful, and suitable for various applications.

2. Rothenberger Romax Compact: Ideal for tight spaces and quick jobs.

3. Rothenberger Romax AC ECO: Great for professionals needing a high-performance tool.

Tips for Maximising the Lifespan of Your Press Tool

Proper Maintenance and Storage

• Clean the jaws and pressing area regularly.

• Store in a dry, dust-free environment.

• Charge batteries fully before extended storage.

Common Mistakes to Avoid

• Using the wrong jaw size for fittings.

• Neglecting regular maintenance.

• Over-pressing connections, which can weaken fittings.

Frequently Asked Questions (FAQs)

1. Are Rothenberger press tools compatible with all pipe types?

No, they work best with copper, stainless steel, and some PEX systems. Always check the specifications before purchasing.

2. How long does a battery last on a Rothenberger press tool?

Battery life varies, but most models can complete 100-200 presses per charge.

3. Can I rent a Rothenberger press tool instead of buying one?

Yes, many tool rental companies offer them for short-term use, which is a cost-effective option for occasional projects.

4. Do Rothenberger press tools require regular servicing?

Yes, it’s recommended to have them inspected annually to ensure optimal performance.

5. What’s the warranty period for Rothenberger press tools?

Most models come with a 1-2 year manufacturer’s warranty, though extended warranties may be available.

6. Is a Rothenberger press tool worth it for home use?

If you do frequent plumbing work, it can be a great investment. Otherwise, a rental might be a better choice.

Conclusion

Final Verdict – Is It Worth It?

The Rothenberger press tool is an excellent investment for professionals and frequent users. Its efficiency, safety benefits, and durability make it stand out in the plumbing industry. However, for occasional users, renting might be a better financial decision.

Shop the Rothenberger Press Tool at PressIt

Introduction

What Is a Milwaukee Press Tool?

A Milwaukee press tool is a professional-grade device designed for connecting pipes using press fittings. It eliminates the need for welding, soldering, or threading, making plumbing and mechanical installations faster and more efficient.

Why Mastering It Matters

Mastering the Milwaukee press tool ensures efficiency, safety, and precision in various applications, from plumbing to HVAC systems. It enhances productivity while reducing installation errors, ensuring long-lasting, reliable pipe connections.

Getting Started with a Milwaukee Press Tool

Key Features and Benefits

• Speed & Efficiency: Reduces installation time significantly.

• Durability: Built with high-quality materials for longevity.

• Ergonomic Design: Lightweight and user-friendly for extended use.

• Versatility: Compatible with various pipe materials and fitting sizes.

• Battery-Powered Convenience: Allows for cordless operation in tight spaces.

Understanding Different Milwaukee Press Tools

Milwaukee offers a range of press tools, including:

• M12 Force Logic Press Tool: Ideal for small-diameter applications.

• M18 Force Logic Press Tool: Suitable for larger-scale installations.

• Long-Throw Press Tool: Designed for high-force applications.

Essential Safety Guidelines

Proper Handling Techniques

• Always use both hands for better control.

• Keep fingers away from the pressing jaws.

• Ensure the tool is in good working condition before use.

Must-Have Safety Gear

• Safety Gloves: Protect hands from sharp edges and pressurized fittings.

• Eye Protection: Shields against flying debris and accidental fluid leaks.

• Protective Clothing: Prevents burns and abrasions.

Step-by-Step Guide to Using a Milwaukee Press Tool

Setting Up Your Workstation

1. Choose a stable work surface.

2. Ensure proper lighting.

3. Arrange tools and accessories for easy access.

Loading the Press Tool Correctly

1. Select the appropriate jaw or ring size.

2. Securely attach the press jaw to the tool.

3. Align the fitting properly before pressing.

Executing the Perfect Press

1. Insert the pipe into the fitting.

2. Position the press jaw over the fitting.

3. Activate the tool and apply steady pressure until the cycle completes.

4. Inspect the connection for proper sealing.

Best Practices for Efficiency

Maximising Precision and Accuracy

• Use a deburring tool to smooth pipe edges before pressing.

• Mark pipe insertion depth to ensure proper fitting placement.

• Perform a test press on a scrap pipe before starting a project.

Common Mistakes and How to Avoid Them

• Using the wrong jaw size: Always check specifications before pressing.

• Pressing incomplete connections: Ensure pipes are fully inserted into fittings.

• Neglecting maintenance: Clean and lubricate the tool regularly.

Milwaukee Press Tool Maintenance

Routine Cleaning and Care

• Wipe the tool after each use.

• Store in a dry place to prevent corrosion.

• Check battery levels before each job.

Troubleshooting Common Issues

Comparing Milwaukee Press Tools to Other Brands

Key Differences and Advantages

• Superior Battery Life: Lasts longer compared to competitors.

• Enhanced Durability: Built for rugged job site conditions.

• Ergonomic Design: Reduces user fatigue.

Why Professionals Prefer Milwaukee

• Trusted brand with proven reliability.

• Comprehensive warranty and customer support.

• Wide range of compatible accessories.

Pro Tips for Advanced Users

Enhancing Speed Without Sacrificing Quality

• Organise fittings and pipes before starting work.

• Use Milwaukee's One-Key technology for tool tracking and optimisation.

• Train apprentices on proper press techniques to improve workflow.

Customising Your Tool for Different Applications

• Attach different jaw sizes based on pipe dimensions.

• Invest in extended battery packs for longer usage.

• Use Milwaukee’s crimping rings for high-pressure applications.

Applications Across Industries

How Plumbers Use Milwaukee Press Tools

• Joining copper and PEX pipes in residential and commercial plumbing.

• Reducing installation time by eliminating soldering.

Electrical and HVAC Applications

• Securing conduit connections.

• Pressing refrigerant lines for HVAC installations.

Milwaukee Press Tool Accessories and Attachments

Must-Have Add-ons for Better Performance

• Extended jaws for larger pipes.

• LED work light attachment for low-light environments.

• Belt clips for hands-free carrying.

How to Choose the Right Accessories

• Consider the pipe material and size.

• Ensure compatibility with your Milwaukee model.

• Opt for Milwaukee-branded accessories for best performance.

Environmental Benefits of Using Milwaukee Press Tools

Reducing Waste and Energy Consumption

• No need for consumables like flux or solder.

• Lower electricity usage compared to welding equipment.

Sustainable Practices in Construction

• Minimises hazardous waste.

• Promotes leak-free connections for better water conservation.

Cost Analysis: Is a Milwaukee Press Tool Worth It?

Initial Investment vs. Long-Term Savings

• Higher upfront cost compared to traditional tools.

• Saves time and reduces labor costs.

• Lower maintenance expenses.

Frequently Asked Questions (FAQs)

How do I choose the right Milwaukee press tool for my needs?

Consider pipe sizes, application type, and battery life requirements.

Can I use a Milwaukee press tool for different pipe materials?

Yes, Milwaukee press tools work with copper, PEX, and stainless steel pipes.

What is the lifespan of a Milwaukee press tool?

With proper maintenance, they can last over 10 years.

Do Milwaukee press tools require special maintenance?

Regular cleaning, battery checks, and occasional jaw replacements are needed.

Are there different sizes of press jaws available?

Yes, Milwaukee offers a range of press jaws for various pipe diameters.

Where can I buy genuine Milwaukee press tool accessories?

Purchase at your Milwaukee Press Tool from Press It today.

Conclusion

Mastering a Milwaukee press tool ensures efficiency, accuracy, and cost savings in various industries. By following best practices, maintaining your tool, and investing in the right accessories, you can maximise its performance and longevity.

Shop Milwaukee Press Tools Now

Milwaukee M12 Sub Compact Force Logic Hydraulic Press Tool | Profile-M | Incl. 3 Jaws

View our full range of press tools available.

The Importance of Copper Fittings in Plumbing Systems

Copper fittings play a crucial role in plumbing systems, ensuring water flows efficiently throughout a home or business. These fittings connect pipes, regulate pressure, and contribute to the overall reliability of plumbing infrastructure. While copper is known for its durability and corrosion resistance, over time, even the highest-quality fittings can degrade, leading to potential issues.

Why Copper Fittings Are Widely Used

• High durability and longevity

• Resistance to corrosion and bacterial growth

• Suitable for both hot and cold water applications

How They Contribute to a Reliable Plumbing System

• Provide secure and leak-free connections

• Help maintain consistent water pressure

• Support efficient water distribution

Sign #1: Frequent Leaks and Water Damage

One of the most noticeable indicators that it’s time to upgrade your copper fittings is persistent leaks. If you find yourself frequently repairing leaks, the fittings may have reached the end of their lifespan.

Causes of Leaky Copper Fittings

• Corrosion due to prolonged exposure to moisture

• Poor installation or improper sealing

• Damage from fluctuating water pressure

Identifying Water Damage in Your Home

• Damp spots on walls or ceilings

• Mold and mildew growth

• Sudden increase in water bills

Short-term vs. Long-term Repairs

Short-term fixes like tightening or resealing joints may provide temporary relief, but upgrading to new, high-quality copper fittings ensures long-term reliability and prevents recurring issues.

Sign #2: Discoloured or Corroded Pipes

Discoloration on your copper pipes is a strong indication that they are deteriorating and need replacement.

Understanding Copper Corrosion

Corrosion occurs when copper reacts with oxygen, water, and other environmental factors, leading to weakened fittings and potential leaks.

Green and Black Marks: What They Indicate

• Greenish-blue patina: A sign of oxidation, common in older pipes

• Black streaks: Indicate severe corrosion that could lead to leaks

How Corrosion Affects Water Quality

• Metallic taste in drinking water

• Possible contamination from corroded materials

• Reduced water flow due to sediment buildup

Sign #3: Low Water Pressure Issues

A noticeable drop in water pressure could be linked to deteriorating copper fittings.

Connection Problems Leading to Pressure Drops

Over time, mineral deposits and corrosion inside fittings can restrict water flow, leading to reduced pressure.

Detecting Water Pressure Decline

• Weak water flow from taps and showers

• Inconsistent pressure throughout the home

• Slow-filling appliances such as washing machines

When to Replace vs. Repair

If multiple fittings are affected, upgrading them is the best long-term solution rather than making frequent repairs.

Sign #4: Unusual Noises from Your Pipes

Unusual noises coming from your plumbing system may indicate failing copper fittings.

Banging, Whistling, and Rattling: What They Mean

• Banging sounds: May result from loose or worn-out fittings

• Whistling noises: Indicate water flow restriction due to buildup inside fittings

• Rattling: Often caused by poorly secured pipes and fittings

Airlocks and Copper Fitting Deterioration

Air pockets trapped in pipes can cause vibration and unusual sounds, suggesting the need for replacement.

How New Fittings Reduce Pipe Noises

• Improved sealing reduces water hammer effects

• New fittings ensure smooth water flow, minimizing turbulence

Sign #5: Higher Water Bills Without Explanation

A sudden rise in your water bill may indicate hidden leaks due to failing copper fittings.

Hidden Leaks and Water Waste

Even small leaks can lead to significant water waste over time.

Faulty Fittings Leading to Inefficiency

Deteriorated copper fittings may cause small, unnoticed leaks that add up to higher utility costs.

How Upgraded Fittings Save Money

• Preventing leaks reduces water waste

• Improved efficiency lowers overall plumbing repair costs

The Risks of Delaying Copper Fitting Upgrades

Delaying necessary upgrades can lead to serious consequences, including:

• Structural damage from persistent leaks

• Health hazards due to water contamination

• Increased costs for emergency repairs

How to Choose the Right Copper Fittings for Your Upgrade

Different Grades of Copper Fittings

• Type M: Thin-walled, best for low-pressure applications

• Type L: Medium thickness, suitable for residential plumbing

• Type K: Thickest walls, ideal for underground installations

Compatibility with Existing Plumbing Systems

Ensure new fittings match your existing pipes in terms of size, material, and connection type.

Cost vs. Long-Term Benefits

Investing in high-quality fittings may cost more upfront but offers long-term savings through increased durability.

Professional vs. DIY Copper Fitting Replacement

When DIY Replacement is an Option

• Minor repairs with accessible pipes

• Basic fitting replacements with proper tools

Benefits of Hiring a Professional

• Expertise in handling complex plumbing systems

• Proper sealing and installation techniques

Tools Required for Proper Installation

• Pipe cutter

• Soldering kit

• Adjustable wrench

Best Practices for Maintaining Copper Fittings

Regular Inspection Tips

• Check for discoloration and leaks

• Monitor water pressure changes

Preventative Maintenance to Reduce Corrosion

• Install water softeners to reduce mineral buildup

• Use protective coatings on exposed pipes

Cleaning Methods to Prolong Lifespan

• Vinegar and baking soda for light cleaning

• Commercial copper cleaners for heavy corrosion

How Copper Fitting Upgrades Improve Your Home’s Value

Upgrading fittings enhances plumbing efficiency, boosting your home’s resale value.

Enhancing Plumbing Efficiency

• Reduces maintenance issues

• Prevents costly emergency repairs

Boosting Property Resale Value

• Buyers prefer homes with updated plumbing

• Increases overall home reliability

Long-Term Cost Savings

• Reduced water waste

• Fewer repair costs

Frequently Asked Questions (FAQs)

1. How long do copper fittings last?

   • Typically, 20-50 years, depending on water quality and maintenance.

2. Can I mix copper fittings with other materials?

   • Yes, but use appropriate connectors to prevent corrosion.

3. What are the signs of a failing copper fitting?

   • Leaks, discoloration, and water pressure issues.

4. How can I prevent corrosion in copper fittings?

   • Use water softeners and inspect fittings regularly.

Conclusion

Upgrading your copper fittings ensures a reliable plumbing system, improves water efficiency, and prevents costly repairs. Don’t wait—upgrade today!

Pick up your Copper Press Fittings at Press It Today

Pegler Xpress Water 90degrees Bend 22mm

Introduction: Understanding Copper and PVC in Plumbing

Plumbing systems are the lifeblood of modern civilisation, ensuring a steady supply of clean water and efficient waste management. The materials used in these systems have evolved significantly, with copper and PVC leading the way. Each has unique advantages, but the advent of press fittings has revolutionised their application. Press fittings offer speed, efficiency, and reliability, making them a preferred choice for professionals and homeowners alike.

This article delves into the comparison between copper and PVC, highlighting why press fittings have emerged as a game-changer in the plumbing industry.

The Evolution of Plumbing Materials

Plumbing materials have come a long way since the days of clay and lead pipes. In the 20th century, copper became the gold standard due to its durability, resistance to corrosion, and ability to handle high pressures. By contrast, PVC emerged as a lightweight, cost-effective alternative, especially for residential and low-pressure applications.

The development of press fittings has further enhanced these materials, allowing plumbers to create leak-proof connections without the need for soldering or adhesives. This innovation has not only saved time but also improved safety on worksites.

Copper vs. PVC: Key Differences

Material Composition and Durability
Copper is a natural metal renowned for its strength and longevity. It withstands wear and tear, resists bacterial growth, and is unaffected by UV exposure. PVC, a synthetic plastic, is lightweight and resistant to chemical corrosion but may degrade under prolonged exposure to sunlight or extreme temperatures.

Temperature Resistance: Which Performs Better?
Copper outperforms PVC in high-temperature applications, making it ideal for hot water systems and industrial settings. PVC, while suitable for cold water delivery, can weaken under heat, limiting its versatility.

Cost Considerations: Initial and Long-Term
PVC is more affordable upfront, making it a popular choice for budget-conscious projects. However, copper’s durability and low maintenance often translate to lower costs over the system’s lifespan, particularly when paired with press fittings.

Advantages of Press Fittings Over Traditional Methods

Speed and Ease of Installation
Press fittings eliminate the need for soldering, welding, or adhesives, reducing installation times by up to 50%. This efficiency minimises labour costs and project delays.

Reducing Human Error in Plumbing
Traditional methods like soldering require skill and experience, and mistakes can lead to leaks or weak connections. Press fittings use mechanical compression, ensuring a consistent seal every time.

Maintenance and Longevity
With fewer joints prone to failure, press fittings reduce the likelihood of leaks. Their durability also minimises the need for frequent repairs, adding to their appeal for both copper and PVC systems.

Why Copper Outshines PVC with Press Fittings

Strength and Reliability for High-Pressure Systems
Copper’s robustness makes it a preferred choice for high-pressure and high-temperature applications. Press fittings enhance this reliability by creating secure, leak-proof connections.

Corrosion Resistance and Longevity
While copper naturally resists corrosion, press fittings ensure that joints remain sealed and protected, extending the lifespan of the system. PVC, though corrosion-resistant, lacks the overall durability of copper in demanding environments.

Eco-Friendliness and Sustainability
Copper is a recyclable material, making it an environmentally friendly option. PVC, while recyclable in some forms, contributes to plastic waste and environmental concerns over time.

Applications: When to Choose Copper or PVC

Residential Plumbing: Best Use Cases
For homes, PVC is suitable for cold water systems and drainage due to its affordability and ease of installation. Copper, on the other hand, is ideal for hot water systems and high-pressure applications.

Commercial and Industrial Plumbing
In large-scale settings, copper is often the material of choice for its reliability and ability to handle extreme conditions. Press fittings further enhance its appeal by enabling faster and safer installations.

The Cost Factor: Are Press Fittings Worth It?

Cost of Materials and Labour Savings
While press fittings may have a higher initial cost, the reduction in labour expenses and project time often offsets this. Additionally, their reliability minimises future repair costs.

Long-Term Value: Reduced Downtime and Repairs
Press fittings create durable connections that are less prone to failure. This longevity reduces the need for costly downtime and repairs, particularly in commercial settings where time is money.

How to Choose the Right Press Fittings for Your Plumbing System

Types of Press Fittings: Pros and Cons
Press fittings come in various materials, including brass, stainless steel, and plastic. Selecting the right type depends on the application, compatibility with the piping material, and environmental factors.

Factors to Consider: Pipe Size, Compatibility, and More
When choosing press fittings, consider factors such as pipe size, system pressure, and whether the material is compatible with copper or PVC. Consulting a professional ensures optimal performance.

Common Misconceptions About Press Fittings

Addressing Concerns About Durability and Leaks
Some sceptics question whether press fittings can match the strength of soldered or welded joints. In reality, press fittings are rigorously tested and proven to provide reliable, long-lasting seals.

Dispelling Myths About Copper and PVC
There’s a misconception that copper is always expensive and that PVC is inherently fragile. In truth, each material has its strengths, and press fittings allow users to maximise these benefits.

FAQs: All You Need to Know About Copper, PVC, and Press Fittings

1. What Are Press Fittings and How Do They Work?
   Press fittings use mechanical compression to create a watertight seal, eliminating the need for soldering or adhesives.

2. Can Press Fittings Be Used with Both Copper and PVC?
   Yes, press fittings are compatible with both materials, provided the correct type is selected.

3. Are Press Fittings Suitable for DIY Projects?
   While they are user-friendly, professional installation is recommended for optimal results.

4. How Do Press Fittings Compare to Welding or Soldering?
   Press fittings are faster, safer, and more convenient, though they may have a higher initial cost.

5. What Maintenance Do Press Fittings Require?
   Press fittings require minimal maintenance, as their robust seals reduce the likelihood of leaks.

6. Are There Environmental Benefits to Using Press Fittings?
   Yes, especially when paired with copper, as they promote sustainability through reduced waste and recyclability.

Conclusion: Embracing the Future of Plumbing

Copper and PVC each have their place in modern plumbing, but the introduction of press fittings has transformed how these materials are used. By offering speed, reliability, and longevity, press fittings have become an essential tool for professionals and DIY enthusiasts alike. Whether you prioritise durability, cost, or sustainability, press fittings are a clear winner in the ongoing evolution of plumbing technology.

Shop our Copper Fitting Top Picks from Conex

Milwaukee press tools have earned a reputation for their remarkable durability and exceptional quality. With a history rooted in innovation and customer-centric design, Milwaukee tools stand out as a reliable choice for professionals across industries. This article explores the reasons behind their enduring appeal, highlighting the features, engineering, and practices that make these tools built to last.

Introduction to Milwaukee Press Tools

Milwaukee tools began with a commitment to quality and innovation, which remains at the heart of their philosophy today. Founded in 1924, the brand quickly became synonymous with professional-grade tools designed to withstand tough conditions. Milwaukee’s focus on durability aligns with its goal to create tools that not only perform exceptionally but also endure over time.

From the very start, Milwaukee prioritised robust materials and innovative engineering. Their tools cater to the demanding needs of professionals in industries such as construction, plumbing, and electrical work. This dedication to excellence has solidified their place as a trusted brand among tradespeople.

Materials Used in Milwaukee Press Tools

One of the key factors contributing to the longevity of Milwaukee press tools is their use of high-grade materials. These materials are chosen for their strength, resilience, and resistance to wear and tear.

• High-Quality Metals: Milwaukee press tools are crafted from alloys that offer exceptional strength without compromising on weight. The use of hardened steel ensures resistance to deformation under heavy loads.

• Corrosion Resistance: Many tools feature anti-corrosion coatings, protecting them from rust and ensuring they can withstand harsh environments.

• Sustainability: In recent years, Milwaukee has taken steps to incorporate sustainable materials, reducing the environmental impact of their tools while maintaining their durability.

These material choices are meticulously tested to ensure they meet the rigorous demands of professionals.

Engineering and Design Excellence

Milwaukee’s engineering and design practices set them apart from competitors. The company’s tools are ergonomically designed to reduce user fatigue while maximising efficiency. Their focus on innovation has led to numerous advancements, including improved tool balance and grip designs.

• Advanced Engineering: Milwaukee employs state-of-the-art techniques in the development of their tools, ensuring precision and reliability.

• User-Centric Design: By incorporating feedback from tradespeople, Milwaukee has refined its designs to meet real-world needs.

• Durability by Design: Features such as sealed systems protect internal components, extending the life of the tools.

Case studies reveal how these designs directly impact the usability and lifespan of their tools, reinforcing the brand’s reputation for excellence.

Rigorous Testing Standards

Milwaukee tools undergo extensive testing to ensure they can withstand the demands of daily use. Their testing processes replicate real-world conditions, pushing the tools to their limits.

• Simulated Usage Scenarios: Tools are subjected to conditions such as extreme temperatures, high humidity, and continuous operation.

• Performance Benchmarks: Each tool must meet strict performance criteria before being released to the market.

• User Validation: Field tests with professional tradespeople provide valuable insights and further ensure reliability.

These rigorous standards ensure that Milwaukee press tools consistently deliver outstanding performance.

Longevity Features in Milwaukee Tools

Milwaukee incorporates several features that enhance the lifespan of their press tools, including:

• Anti-Corrosion Coatings: These prevent rust and damage from exposure to moisture.

• Sealed Systems: Components are protected from dust and debris, reducing wear and tear.

• Modular Design: Many tools are designed with interchangeable parts, making repairs and upgrades straightforward.

Such features contribute significantly to the tools’ longevity, ensuring they remain reliable over years of use.

Industry Applications of Milwaukee Press Tools

Milwaukee press tools are versatile, catering to a variety of industries:

• Plumbing and HVAC: Used for tasks like pipe fitting and maintenance, Milwaukee tools are trusted for their precision and reliability.

• Electrical Work: Their press tools simplify the installation of electrical conduits and fittings.

• Construction: Durable and efficient, these tools are indispensable on construction sites.

Professionals across these fields rely on Milwaukee tools to deliver consistent results, even in challenging conditions.

Milwaukee’s Commitment to Innovation

Innovation is a cornerstone of Milwaukee’s success. The brand consistently invests in research and development to create tools that meet evolving industry needs.

• Patented Technologies: Milwaukee’s proprietary technologies, such as REDLINK™ intelligence, enhance tool performance and safety.

• Smart Tools: Integration of IoT features allows users to monitor tool performance and usage.

• Continuous Improvement: Feedback loops ensure that each generation of tools is better than the last.

This commitment to innovation ensures Milwaukee press tools remain at the forefront of the industry.

Comparing Milwaukee Tools to Competitors

When compared to other brands, Milwaukee press tools consistently rank higher in durability, performance, and value for money.

• Durability Tests: Independent studies show Milwaukee tools outperform competitors in longevity.

• Customer Testimonials: Tradespeople often highlight the reliability and superior build quality of Milwaukee tools.

• Value Analysis: While Milwaukee tools may have a higher upfront cost, their long lifespan makes them a cost-effective choice over time.

Maintenance Tips for Milwaukee Press Tools

Proper maintenance is key to maximising the lifespan of any tool. For Milwaukee press tools, consider the following:

• Storage: Store tools in a dry, secure location to prevent damage.

• Cleaning: Regularly clean tools to remove debris and prevent build-up.

• Inspection: Periodically check for wear and address issues promptly.

Following these tips ensures your Milwaukee tools remain in top condition for years.

Customer Support and Warranty

Milwaukee’s customer support and warranty policies are among the best in the industry:

• Comprehensive Warranty: Many tools come with a lifetime guarantee, reflecting the brand’s confidence in their durability.

• Responsive Support: Milwaukee’s customer service team is readily available to assist with queries and repairs.

• Repair Services: The company offers repair services to extend the life of their tools.

These policies provide peace of mind for professionals investing in Milwaukee products.

FAQs About Milwaukee Press Tools

• What makes Milwaukee press tools different from others? Milwaukee tools combine innovative technology, high-grade materials, and rigorous testing to deliver unmatched durability.

• How long do Milwaukee tools last on average? With proper care, Milwaukee tools can last decades, often outlasting competitors.

• Are Milwaukee press tools worth the investment? Yes, their longevity and performance make them a cost-effective choice in the long run.

• How are they maintained? Regular cleaning, proper storage, and periodic inspections ensure optimal performance.

• Do they come with warranties? Many Milwaukee tools include a lifetime warranty, reflecting their durability.

Conclusion: The Enduring Legacy of Milwaukee Press Tools

Milwaukee press tools exemplify the perfect blend of durability, innovation, and performance. Built to withstand the rigours of professional use, they remain a top choice for tradespeople worldwide. Investing in Milwaukee tools means investing in reliability, quality, and a trusted partner for your projects.

Shop Milwaukee Press Tools Now

Milwaukee M12 Sub Compact Force Logic Hydraulic Press Tool | Profile-M | Incl. 3 Jaws

View our full range of press tools available.

PressIT is your trusted source for high-quality plumbing supplies across the UK and Ireland. Our 15mm copper tees are expertly crafted for durability and efficiency, making them ideal for a variety of plumbing installations.

We offer a wide selection of copper press fittings from top brands like Pegler XPress, Pegler Tectite, and Conex B Press, ensuring you find the perfect solution for your project, whether you need M profile or V profile fittings. Plus, enjoy free delivery on all orders over £150.

15mm Copper Tees for Water Installations

	Conex B Press Water Equal Tee 15mm   £3.49 per unit This Conex B Press Fitting has been designed for use with both hard & half hard copper tube, without the need for flames, fluxes or filler metals. Suitable for water installations both domestic and commercial. Order Now
	Pegler Xpress Water Equal Tee 15mm   £3.10 per unit The Pegler XPress Water Equal Tee 15mm is a high-quality fitting designed for water installations, offering reliable performance and ease of installation.   Order Now
	Conex B Press Water Reduced Both Ends Tee 15x15x22mm   £10.69 per unit This Conex B Press Fitting has been designed for use with both hard & half hard copper tube, without the need for flames, fluxes or filler metals. Suitable for water installations both domestic and commercial. Order Now
	Conex B Press Water Tee with Female Threaded Branch Tee 15 x 15 x 1/2"   £9.79 per unit This Conex B Press Fitting has been designed for use with both hard & half hard copper tube, without the need for flames, fluxes or filler metals. They are suitable for use with domestic & commercial applications. Order Now
	Pegler Tectite Push-Fit Equal Tee 15mm   £4.30 per unit The Pegler Tectite TT24 is a t-piece with three push fit ends. By using Tectite you are using a world class push fitting with unique technology. Tectite provides a piping suitable for domestic and light commercial applications.speed of installation Order Now
	Pegler Xpress Water Female Branch Tee 15x1/2"   £10.96 per unit XPress offers all the benefits of a heat free Press-fit system. Saving time & money with every joint. More diverse range of installations and opportunities. For gas and solar installations. Super sizes available for the highest tower block Order Now
	Pegler Xpress Water Reduced Both Ends Tee 15x15x22mm   £8.96 per unit The Pegler Tectite TT21 is a 45degrees obtuse street elbow with a push fit and tube end. By using Tectite you are using a world class push fitting with unique technology. Suitable for water installations Order Now

15mm Copper Tees for Gas Installations

	Conex B Press Gas Equal Tee 15mm   £4.06 per unit Profile 3 point press ensures a leak free, secure and permanent joint. Press Gas has a high quality coloured o-ring that forms a secure leak free joint when pressed. Suitable for gas installations both domestic and commercial. Order Now
	Pegler Xpress Gas Equal Tee 15mm   £4.25 per unit The Pegler XPress Gas Equal Tee 15mm provides a secure and efficient solution for gas installations, featuring equal press-fit connections on all three ends. Order Now
	Conex B Press Gas Tee with Female Threaded Branch 15 x 1/2 x 15mm   £10.84 per unit Profile 3 point press ensures a leak free, secure and permanent joint. Press Gas has a high quality coloured o-ring that forms a secure leak free joint when pressed. Suitable for gas installations both domestic and commercial. Order Now
	Pegler Xpress Gas Female Branch Tee 15x1/2"   £13.00 per unit Female branch tee, press-fit x BSP parallel female branch. Order Now

Aqua Gas 15mm Copper Tees

PCC Press Copper Aquagas Equal Tee 15mm   £3.08 per unit 15mm Female x 15mm Female x 15mm Female. Suitable for for use with drinking water, natural gas, LPG, heating, cooling, compressed air and much more Order Now

PressIT is your trusted provider of premium plumbing products across the UK and Ireland. Our 54mm copper elbows are designed with precision and durability in mind, ensuring reliable performance for a wide range of applications.

We offer an extensive selection of copper press fittings from renowned brands like Pegler XPress, Pegler Tectite, and Conex B Press. Whether you need M profile or V profile fittings, we have the perfect solution to meet your requirements. Plus, benefit from free delivery on all orders over £150.

54mm Copper Elbow for Water Installations

	Conex B Press Water 45degrees Elbow 54mm   £31.08 per unit This Conex B Press Fitting has been designed for use with both hard & half hard copper tube, without the need for flames, fluxes or filler metals. Suitable for water installations both domestic and commercial. Order Now
	Conex B Press Water 45degrees Street Elbow 54mm   £30.65 per unit This Conex B Press Fitting has been designed for use with both hard & half hard copper tube, without the need for flames, fluxes or filler metals.   Order Now
	Conex B Press Water 90degrees Elbow 54mm   £37.38 per unit This Conex B Press Fitting has been designed for use with both hard & half hard copper tube, without the need for flames, fluxes or filler metals. Suitable for water installations both domestic and commercial. Order Now
	Conex B Press Water 90degrees Elbow with Male Thread 90degrees Elbow 54 x 2"   £67.06 per unit This Conex B Press Fitting has been designed for use with both hard & half hard copper tube, without the need for flames, fluxes or filler metals. They are suitable for use with domestic & commercial applications. Order Now
	Conex B Press Water 90degrees Elbow with Female Thread 90degrees Elbow 54 x 2"   £63.58 per unit This Conex B Press Fitting has been designed for use with both hard & half hard copper tube, without the need for flames, fluxes or filler metals. Suitable for water installations both domestic and commercial. Order Now
	Conex B Press Water 90degrees Street Elbow 54mm   £37.82 per unit This Conex B Press Fitting has been designed for use with both hard & half hard copper tube, without the need for flames, fluxes or filler metals. Order Now
	Pegler Tectite Push-Fit 45degrees Elbow 54mm   £49.68 per unit The Pegler Tectite TT21 is a 45degrees obtuse street elbow with a push fit and tube end. By using Tectite you are using a world class push fitting with unique technology. Suitable for water installations Order Now
	Pegler Tectite Push-Fit 45degrees Street Elbow 54mm   £52.13 per unit The Pegler Tectite TT12 is a 90degrees elbow with two push fit ends. By using Tectite you are using a world class push fitting with unique technology. Tectite provides a piping suitable for domestic and light commercial applications. Order Now
	Pegler Tectite Push-Fit 90degrees Elbow 54mm   £55.90 per unit The Pegler Tectite TT12 is a 90degrees elbow with two push fit ends. By using Tectite you are using a world class push fitting with unique technology. Tectite provides a piping suitable for domestic and light commercial applications. Order Now
	Pegler Tectite Push-Fit 90degrees Street Elbow 54mm   £52.57 per unit The Pegler Tectite TT12S is a 90degrees with a push fit and tube end. By using Tectite you are using a world class push fitting with unique technology. Tectite provides a piping suitable for domestic and light commercial applications.speed of installation Order Now
	Pegler Xpress Water 45degrees Elbow 54mm   £35.74 per unit XPress is a leading press-fit system, offering a comprehensive and flexible range for all modern building services, providing easy, fast, cost effective and reliable joints. Order Now
	Pegler Xpress Water 45degrees Street Elbow 54mm   £37.49 per unit Leak Before Press feature. No hot works required. BSI Kitemark Approved. Reduced flushing requirement Order Now
	Pegler Xpress Water 90degrees Elbow 54mm   £40.21 per unit Leak Before Press feature. No hot works required. BSI Kitemark Approved. Reduced flushing requirement Order Now
	Pegler Xpress Water 90degrees Street Elbow 54mm   £41.90 per unit Xpress Copper S12R Press-Fit Reduced Elbows ensure an efficient and heat free installation technique combined with a high performance. They are suitable for use with domestic & commercial applications. Order Now
	Pegler Xpress Water Female Elbow 54x2"   £59.93 per unit XPress is a leading press-fit system, offering a comprehensive and flexible range for all modern building services, providing easy, fast, cost effective and reliable joints. Order Now
	Pegler Xpress Water Male Elbow 54x2"   £67.09 per unit Unique Leak Before Press feature ensure any unpressed fittings are identified upon testing. Rapid jointing technique ensures time and labour saving compared to traditional jointing methods Order Now

54mm Copper Elbow for Gas Installations

	Conex B Press Gas 45degrees Obtuse Elbow 54mm   £33.22 per unit Profile 3 point press ensures a leak free, secure and permanent joint. Press Gas has a high quality coloured o-ring that forms a secure leak free joint when pressed. Suitable for gas installations both domestic and commercial. Order Now
	Conex B Press Gas 45degrees Obtuse Street Elbow 54mm   £32.63 per unit Profile 3 point press ensures a leak free, secure and permanent joint. Press Gas has a high quality coloured o-ring that forms a secure leak free joint when pressed. Order Now
	Conex B Press Gas 90degrees Elbow 54mm   £39.52 per unit Profile 3 point press ensures a leak free, secure and permanent joint. Press Gas has a high quality coloured o-ring that forms a secure leak free joint when pressed. Suitable for gas installations both domestic and commercial. Order Now
	Conex B Press Gas 90degrees Elbow with Male Thread 54 x 2"   £68.88 per unit Profile 3 point press ensures a leak free, secure and permanent joint. Press Gas has a high quality coloured o-ring that forms a secure leak free joint when pressed. Order Now
	Conex B Press Gas 90degrees Elbow with Female Thread 54 x 2"   £66.83 per unit Profile 3 point press ensures a leak free, secure and permanent joint. Press Gas has a high quality coloured o-ring that forms a secure leak free joint when pressed. Suitable for gas installations both domestic and commercial. Order Now
	Conex B Press Gas 90degrees Street Elbow 54mm   £39.77 per unit Profile 3 point press ensures a leak free, secure and permanent joint. Press Gas has a high quality coloured o-ring that forms a secure leak free joint when pressed. Order Now
	Pegler Xpress Gas 45degrees Obtuse Elbow 54mm   £44.72 per unit XPress offers all the benefits of a heat free Press-fit system. Saves time & money with every joint. More diverse range of installations and opportunities. Super sizes available for the highest tower block Order Now
	Pegler Xpress Gas 45degrees Obtuse Street Elbow 54mm   £46.88 per unit Obtuse street elbow, press-fit x male end for insertion into fitting. Suitable for gas installations both domestic and commercial. Order Now
	Pegler Xpress Gas 90degrees Elbow 54mm   £50.26 per unit XPress offers all the benefits of a heat free Press-fit system. Saves time & money with every joint. More diverse range of installations and opportunities. Super sizes available for the highest tower block Order Now
	Pegler Xpress Gas 90degrees Street Elbow 54mm   £52.37 per unit Street elbow, press-fit x male end for insertion into fitting. Order Now